Bölüm notları
Both multi-color AMS printing and soluble supports run on the same filament-swap mechanics, so both cost you extra material and time you should budget for before you press print.
In this episode you'll learn:
• Bambu Lab introduced the AMS in May 2022 alongside the X1 Carbon; the box has four slots, two desiccant compartments, and a humidity sensor but no heater, so it keeps filament dry rather than actively drying it.
• A standard 0.4 mm hotend holds roughly 50 to 100 mm3 of molten plastic, so the first few centimeters after each color change carry the old color and must be flushed to a…
Web sitesi: feeds.printara3d.cz

