Notatki do odcinka
When desktop FDM hobbyists outgrow PLA and PETG, nylon and polycarbonate are the next step for heat-resistant, load-bearing functional parts, but only with proper drying and hardware.
In this episode you'll learn:
• PA6 reaches around 70 MPa tensile strength while PA12 sits at 45 to 55 MPa, with PA12 absorbing only about 1.5% moisture by weight versus up to 9% for PA6.
• Polycarbonate delivers 55 to 75 MPa tensile strength and notched impact toughness of 600 to 850 J/m, an order of magnitude above most FDM materials.
• Pure polycarbonate has a glass transition around 145°C, and Prusament…
Strona: feeds.printara3d.cz

