Notes d’épisode
Two identical tugboats, same file, same printer, same plastic. One took an hour and a half to print, the other nearly three hours, and the only setting that changed was layer height. This episode puts real numbers on the most consequential trade-off in everyday 3D printing: how thick each slice is, why 0.2 mm became the default, and what you actually get when you go finer.
You'll come away understanding what layer height is and why it is tied to nozzle diameter (roughly 0.1 to 0.3 mm on a standard 0.4 mm nozzle); why print time scales roughly inversely with layer height, so 0.1 mm costs…
Site web: rss.com

